WorldWide Armor Services - Armored Vehicles

INTERNATIONAL ARMORING
CORPORATION

2005/6 Toyota Land Cruiser STD- FULLY ARMORED
PROTECTION LEVELS CEN B6 / NIJ Level III/ IAC Level V
RIGHT HAND DRIVE VERSION

Vehicle model/type for use in extreme climatic and physical conditions

Basic Vehicle General Chassis Specifications

Toyota land cruiser std station wagon – 10 seater – 4 x 4 – rhd – std 105r-gcmrs – 4164 cc diesel with aftermarket supercharger – 5 speed dual range manual transmission – 50 litre extra fuel tank – air conditioner – snorkel type air cleaner – vehicle model for use in extreme climatic and physical conditions – many other additional standard features for model.

Base Armor Specifications
Level CEN B-6 / NIJ Level III / LEVEL V

9mm Luger (full metal jacket, round nose or soft core), 8 g., 400 ms, 3 shots
357 Magnum (full metal jacket, coned bullet, or soft core), 10.2 g, 430 m/s,
3 shots
44 Magnum (full metal jacket, flat nose, or soft core), 15.6 g, 440 m/s, 3
shots
223 Caliber, 45 gr., 919 mps / 3,200 fps
7.62 x 51mm M80 (full metal jacket, pointed bullet, soft core), 149 gr., 830
mps / 2,700 fps
5.56 x 45 (full metal jacket, pointed bullet, soft core), 4 g, 950 m/s, 3
shots.

Glass areas: Windshield, rear doors and side glass will be removed and replaced with bullet-resistant transparent armor multi-layer glass and polycarbonate inner layer to prevent spalling upon ballistic impact. Glass will be curved and contoured to retain the appearance of the original glass and provided from Isoclima or equivalent source. All transparent areas will be B6/NIJ III.

Operable window driver side only – lowers approx. 6”.

Body: Doors, pillar posts, side panels, kick-panels, firewall, and headers (laterals) will be armored with Armormax ballistic composite material equivalent material or ballistic steel in accordance with defined standard of defeat. Elitus® overlap system used throughout. NIJ Level III protection.

Roof: Armored with Armormax® ballistic composite material in accordance with NIJ III standards at 30 degree angle protection.

Floor: Floor areas will be armored with multi-ply rigid ballistic fragmentation material combined with Armormax® PAC100 molded to form fit contours of floor boards and panels. Protection single German DM51 or US M-67.

Vehicle Structured Modifications: Reinforcement of pillar posts and hinges, high pressure heavy duty shocks, and upgrade of suspension to include HD torsion bars, polyurethane bushings. Hardened plastic door risers installed on all doors.

Fuel tank: Self-sealing tank.

Battery: Original replaced with an Optima® bullet-resistant battery.

Electronic control Module (ECM) protection.

Wire mesh tailpipe protection.

Locking Gas cap.

Note: Armored vehicle illustrated is STD RHD model but LHD also Available as are upgrade options and
power-train combinations. Armoring specifications for B6 protection level also apply to other makes and
models of vehicles.

INTERNATIONAL ARMORING CORPORATION

TEXAS OFFICE -- Phone/Fax: 325 655-0911
507 SOUTH JEFFERSON STREET
SAN ANGELO, TEXAS 76901, U.S.A.

David A. Griffin
Armoring Services Advisor & Contract Administrator
Cell Phone: 325 234-7747

E-Mail Address: sales@worldwidearmor.com