This Vehicle Has Been SOLD IMMEDIATELY AVAILABLE 2007 Chevrolet Tahoe Fully Armored in B6 Level of Protection Photos of Immediately Available armored 2007 Tahoe   Basic Vehicle Chassis Specifications 2007 Chevrolet Tahoe – 1/2-Ton Chassis * 5.3L V8 – Gas Engine – 4x2 320 Horse Power @ 5200 rpm * 340 ft. lbs. of Torque @ 4200 rpm DVD System Power Door Locks 4 speed automatic w/overdrive * 7 passenger – front & center row bucket seating Leather Interior * Air conditioning-front & rear Adjustable foot pedals Color: White Armor Defeat Specifications IAC Level IV / Level NIJ III/ CEN B6 .357 Magnum (full metal jacket, coned bullet, or soft core), 10.2 g, 425 ms / 158gr. 1450 fps 9mm Luger (full metal jacket, round nose or soft core), 8 g., 381 ms / 124gr. 1250 fps, .44 Magnum (Full metal jacket, flat nose, or soft core), 15.6 g, 460 ms / 240gr 1510 fps 223 Caliber, 45 gr. / 3,200 fps (M-16) 5.56 x 45 (full metal jacket, pointed bullet, soft core), 4 g, 950 m/s; 62gr./3116 fps (AK-47) 7.62 X 39mm, 145 gr., 700mps / 2,430 fps (AK-47) 7.62 X 39mm, 123 gr., 750 mps / 2,697 fps 308 Winchester, (full metal jacket), 150 gr., 860 mps / 2,800 fps 7.62 x 51mm M80 (full metal copper jacket – steel hard core or soft core), 9.72 g, 860 ms / 150 gr., 2,700 fps General Specifications Transparent Armor (Glass areas): Replace the OEM glass in the windshield and all side glass. Glass will be removed and replaced with curved bullet-resistant transparent armor multi-layer glass and polycarbonate inner layer to prevent spalling upon ballistic impact. The transparent armor will be contoured to retain the appearance of the original glass. Rather than curved glass replacing the OEM glass in the rear hatch, which adds a significant amount of weight to the rear hatch; a piece of flat ballistic glass will be mounted in the top-half of the rear compartment just ahead of the rear hatch, which will open to allow access to the rear compartment of the vehicle. This design offers superior ballistic protection and reduces the risk of accidental breakage from the rear hatch slamming down too hard. All glass will be tinted to match OEM tint unless otherwise specified. Body: Doors, pillar posts, side panels, kick-panels, firewall, and headers, cargo area, rear wheel arches, rear cargo doors will all be armored with ballistic steel in accordance with defined standard of defeat. Elitus® overlap system around each window will be used throughout the vehicle to ensure complete protection Roof: Armored with Armormax® ballistic composite material or ballistic steel in accordance with the appropriate standards IAC Level 5 protection at a 45 degree angle of attack. Sunroof if on vehicle will be rendered inoperable. Floor: The floor will be protected by using a blanket of light-weight, multi-ply, laminated, semi-flexible, ballistic fragmentation material (Armormax® PAC100), molded to form fit contours of floorboards and panels. This protection level exceeds a defeat level of a 45-85 gram fragmentation traveling 2,000 fps. German DM51 or US M-67 grenade explosion fragment velocity = 950 fps. Vehicle Structured Modifications: Reinforcement of pillar posts and hinge mounts, high pressure heavy duty shocks, and suspension upgrades as required to maintain original appearance and maneuverability to include: HD torsion bars, HD sway bars, high tension leaf springs and polyurethane bushings as required and as available. Door Modifications: Internal reinforcements will be added to the doors to support the additional armor weight added. Door hinges will be reinforced. Overextension stop-straps will be installed to protect the door hinges from over-extension. Hardened plastic door risers installed on all doors to support closed doors at rest, as required. Access panels for replacing door handles will be included. Fuel tank: Ballistic fragmentation blanket will be applied to fuel tank to suppress potential explosions. Fuel System: Locking Fuel Cap – if required. Electronic Control Module (ECM) will be armored to protect the engine’s computer. Battery: Original replaced with an Optima® bullet-resistant battery.. Exhaust System: Wire mesh tailpipe protection will be added to prevent any objects from being inserted into the tail pipe(s) of the vehicle. Bumpers: Front and rear bumpers will be reinforced (hidden) to allow for “ramming” one’s way out of a boxed in situation. Wheels and Tires: (5) Hutchinson Run flat tire devices will be mounted on “E” rated heavy-duty tires to allow driving even if the tires are deflated. Operable Window(s): Driver side window will operate down to 6 inches to allow external communications, passing of documents at check points, etc. Siren / Strobe lights / PA System /External Listening System included. SOLD SOLD SOLD SOLD Base Vehicle and Armor Conversion Price: $ 102,750.00 FIRM Terms and Conditions Delivery Schedule: Immediate available (Subject to prior sale.) General Terms and Conditions: Payment: 100% Freight: Price is EX Works, Seller’s facilities: Ogden, Utah. Warranty: International Armoring Corporation will extend a 24 months warranty on its armor up-fitting. Testing: All ballistic materials are independently tested. Inspection: We welcome inspections of the facilities or work in progress is welcome, prior to, during or upon completion of the contract. References available upon request. Goverment Contractor Information: Our CAGE Code 1JTY8 DOD Central Contractor Registration Status: CURRENT

WORLDWIDE ARMOR SERVICES
San Angelo, Texas - Phone/Fax: 325-655-0911 E-mail:sales@worldwidearmor.com